Cino L780BT HC - Manual (Page 7)

6/5
Sleep
You will hear 4 beeps in ascending tone and the link
indicator gives 1 blue blink per 2.5 seconds. Now your
FuzzyScan scanner is paired and connected. Open a new
note and place the cursor where you desire to enter the
data.
Press the trigger to scan barcodes. The scanned barcodes
will display on the note.
Apple iOS only allows one HID input device to work at
any one time. So, as soon as the scanner is connected
with the Apple iOS device, its virtual keypad will disappear
automatically. This results in user not able to use both the
virtual keypad and the scanner at the same time. To have
the virtual keypad re-appear, please disconnect the scanner
from the Apple iOS device by scanning the "Sleep" command.
Disconnected Connected