Install necessary software, Required information for network setting – Cino L780WD User Manual

Page 4

Advertising
background image

3

Install Necessary Software

Before you start using the Wi-Fi scanner, you are recommended to install
following software into your host machine.

Cino WaveCentre

The WaveCentre is a useful Windows-based wireless management utility
together with an IP virtual COM software driver. Once you installed
WaveCentre into your host machine, it can create a virtual COM port for each
connected Wi-Fi scanner corresponding to its IP address. Then the Wi-Fi
scanner will work as a local serial device of the remote host.

FuzzyScan Wi-Fi PowerTool

By using the FuzzyScan Wi-Fi PowerTool, you can create Wi-Fi profiles,
change configurations and upgrade firmware with ease. Please note that you
have to install the USB virtual COM software driver before using the
PowerTool.

Required Information for Network Setting

Before connecting the Wi-Fi scanner to your desired remote host, you have
to create a Wi-Fi profile for your scanner. You will need following information
for wireless network setting before creating a new profile.

SSID

The SSID is an 802.11 service set identifier of Independent Wireless Host or
Access Point (AP).

Operation Mode

The Wi-Fi scanner supports both “Infrastructure” and “Ad-Hoc” modes.
Please note that if you select Ad-Hoc mode, you are suggested to use the
Static IP. And the Gateway and Subnet Mask have to be the same as the
remote host.

Region and Channel

The region is where the Wi-Fi scanner is used, and the channel number must
be the same as the channel setting of AP or the remote host.

Security

The Encryption and Authentication will be used to communicate with the AP
or the remote host, such as WEP, WPA and WPA2.

IP Type

Both Static IP and DHCP can be used in your wireless network. But you are
recommended to use Static IP for better management purpose.

Remote IP Address and Port

The Remote IP Address is an IP address of the remote host. And the Port will
be a listen port of WaveCentre used to communicate with your Wi-Fi
scanners.

Local IP Address

The Local IP Address is an IP address of the Wi-Fi scanner.

Advertising
This manual is related to the following products: