Installation – ClassCo InTouch 510 User Manual
Page 5
Installation
In order to function, this product requires Call Waiting service
from your local telephone company.
Installation is easy. Simply follow these directions to install the
unit and you can begin receiving calls while you’re on line.
1.
Unplug your modem line cord from the wall.
2.
If you have plugged a telephone into the modem or another
wall outlet, unplug the telephone’s line cord now.
3.
Connect the line cord that extends from the back of the unit
to the telephone jack on your wall.
4.
Connect your telephone set to the jack marked PHONE on
the back of the unit. (Do not plug your telephone into the
phone jack on the modem.)
5.
Connect your modem to the jack marked MODEM on the
back of the unit.
6.
Plug the AC adapter into the unit and a power outlet.
(Adapter rating is 120VAC IN / 9VAC OUT). The unit does
not use batteries.
7.
Make sure Call Waiting is not disabled in your modem
software. See “Modem Settings” below.
5