Clay Paky A.LEDA B-EYE K20 - Manual (Page 9)

9 A.LEDA B-EYE
Continue ➔
PAN / TILT
Invert pan
Used for reversing Pan movement.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
PAN inversion.
3) Press F to confirm the selection or LEFT D to keep current settings.
Invert tilt
Used for reversing tilt movement.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off) Tilt
inversion.
3) Press F to confirm the selection or LEFT D to keep current settings.
Swap Pan-Tilt
Used for swapping Pan and Tilt channels (as well as Pan fine and Tilt fine).
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
Pan and Tilt channel swap.
3) Press F to confirm the selection or LEFT D to keep current settings.
Encoder Pan-Tilt
Used for enabling the Pan / Tilt encoders.
1) Press
F - the current settings appear on the display (On or Off).
2) Use the UP B and DOWN C keys to enable (On) or disable (Off)
Pan / Tilt encoders.
3) Press F to confirm the selection or LEFT D to keep current settings.
P/T Homing Mode
Lets you set the initial projector Reset mode.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Standard: Pan & Tilt are simultaneously reset.
Sequenced: Tilt is reset first followed by Pan.
3) Press F to confirm the selection or LEFT D to keep the current setting.
Pan Home Def Pos
Lets you assign the Pan channel “home” position at the end of Reset,
without a DMX input signal.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following
settings:
0 degree
90 degrees
180 degrees
270 degrees (default)
3) Press F to confirm the selection or LEFT D to keep the current setting.
Tilt Home Def Pos
Lets you assign the Tilt channel “home” position at the end of Reset,
without a DMX input signal.
1) Press
F , the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
0%
12.5%
25%
50% (default)
75%
87.5%
100%
3) Press F to confirm the selection or LEFT D to keep the current setting.
SILENT MODE
It lets you select the “Silent Mode” from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Standard: Maximum speed and consequently maximum effects noise level.
Quiet: reduces the speed of some effects (Pan/Tilt/Zoom/Zoom rotation),
thereby reducing their noise level.
3) Press F to confirm the selection or LEFT D to keep the current setting.
OPTIONS MENU
Swap
Pan-Tilt
On
Off
Encoder
Pan-Tilt
On
Off
Pan / Tilt Option
Invert
Pan
On
Off
Invert
Tilt
On
Off
P/T Homing
Mode
Standard
Sequenced
Pan Home
Def Pos
Tilt Home
Def Pos
Silent
mode
Standard
Quiet