Clay Paky ALPHA SPOT HPE 1500 ST - Manual (Page 20)

20 ALPHA SPOT HPE 1500 & ST
MACRO EFFECTS
It lets you select the “Macro Effects” set up from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Macro group size
It lets you set the number of projectors to be included in the macro mode
operation.
1) Press
F
2) Use the UP B , DOWN C , RIGHT keys to set the number of projectors
to be included in the “Macro Effect” operation.
3) Press F to confirm the selection or LEFT D to keep the current setting.
Macro fixture Id
It lets you attribute an ID address to the projector for the phase
displacement for the scene’s starting time in Macro mode.
1) Press
F
2) Use the UP B and DOWN C keys to select one of the following settings:
Fixed to X. (to assign to all the projectors to be included in the Macro
operation).
Auto by DMX Address: According to the DMX address, it automatically
detects the starting sequence of the scene in the Macro mode (to assign
to all the projectors to be included in the Macro operation).
3) Press F to confirm the selection or LEFT D to keep the current setting.
SILENT MODE
It lets you select the “Silent Mode” from the two available.
1) Press
F the current setting appears on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
Standard: Maximum speed and consequently maximum effects noise level.
Quiet: reduces the speed of some effects, thereby reducing their noise level.
3) Press F to confirm the selection or LEFT D to keep the current
setting.
LAMP DIMMING
This lets you select the lamp “dimmer” mode, selecting one of the two
available modes:
•
1500W-800W: Default settings, the lamp electronically "dims” from
1500W to 800W and mechanically dims from 800W to 0. Visually, the
Dimmer curve is high performance but a slight flicker is noted in some
dimming positions.
• 1500W-1200W: The lamp electronically “dims” from 1500W to 1200W
and mechanically dims from 1200W to 0. No lamp flicker is visible
when this option is selected. The "dimmer" blades are subject to
higher thermal stress. Thus, more frequent "dimmer" blade
maintenance may be required.
POWER MODE
Allows you to select a Power Mode from the three available.
1) Press
F - the current settings appear on the display.
2) Use the UP B and DOWN C keys to select one of the following settings:
- 1500-1200W Full fan speed: Lamp can change from full-power
(1500W) to half-power (1200W) using the LAMP CONTROL channel.
Fans always work at Full speed
- 1200W Low fan speed: Lamp constantly works in half-power mode
(1200W) while the Fan always works at Low speed. With LAMP
CONTROL channel you can only switch the lamp ON and OFF.
- 1500-1200W Auto fan speed: Lamp can change from full-power
(1500W) to half-power (1200W) using the LAMP CONTROL channel.
Automatically the fans switch from Full speed to Low speed respectively.
3) Press F to confirm the selection or LEFT D to keep current setting.
Power Mode
1500-1200
Full fan speed
1200
Low fan speed
1500-1200
Auto fan speed
Macro
Effects
Macro fixture Id
Macro group
size
Silent
Mode
Standard
Quiet
Lamp
Dimming
1500W-
800W
1500W-
1200W