E n a, S l a, R a l – Clay Paky POINT MH User Manual
Page 2: Ah e, Np a, C o l, S e l, Programming
WARNING
Caution: The display returns to its initial visualisation after
60 sixty seconds of inactivity. The current program, not yet
confirmed with ENTER, will be cancelled.
N.B.: To exit functions without making changes, to return to
the programming menu or the initial hold/rest status, push
the SELECT button several times.
Press UP/DOWN to scroll through the various functions
from the top to the bottom level of the menus or viceversa.
P
ROGRAMMING AUTOMATIC MODE
:
SLAVE MODE (SLA)
1
S
E
ENTER
SELECT
Press SELECT.
The red led lights up.
SETTING DMX ADDRESS
SELECTING SLAVE MODE (SLA)
SELECTING
STAND-ALONE MODE (SA)
MASTER (SAt)
HEA
FUNCTION
: horizontal movement Pan and
vertical movement Tilt
rAI
FUNCTION
: color disc rotation speed
1
S
E
ENTER
SELECT
Press UP/DOWN to
select address 1.
Press ENTER to confirm.
S
E
ENTER
SELECT
O P
S
E
ENTER
SELECT
A u
S
E
ENTER
SELECT
O P
Press SELECT twice.
The red led lights up and
the display shows: OPt.
S
E
ENTER
SELECT
A u
Press UP/DOWN to
select the automatic Aut
Menu.
Press ENTER to confirm.
The display shows: EnA.
S
E
ENTER
SELECT
E n A
S
E
ENTER
SELECT
S L A
N.B.: In the setting phase, if you press DOWN while
pressing UP the address decreases to the minimum
value (1). Vice versa, if you press UP while pressing
DOWN the address increases to the maximum value
(507).
Press ENTER to access
EnA operating mode.
The display shows one
of the three following
modes: SLA - SA - SAt.
Press UP-DOWN to
select SLAVE (SLA)
mode.
Press ENTER to confirm.
The display shows: EnA.
Press SELECT twice to return to rest mode.
P
ROGRAMMING AUTOMATIC MODE
:
• STAND-ALONE MODE (SA)
• MASTER (SAt)
• SOUND TO LIGHT (Snd function HEA)
Press SELECT twice.
The red led lights up and
the display shows: OPt.
S
E
ENTER
SELECT
r A l
S
E
ENTER
SELECT
3 0
Press UP/DOWN to
select rAI function.
Press ENTER to access
the function.
Press UP-DOWN to
select the colour disc
rotation speed: 30 (2
rpm) - 60 (1 rpm) - 120
(0,5 rpm).
Press ENTER to confirm.
The display shows: rAI.
Press UP/DOWN to
select the automatic Aut
Menu.
Press ENTER to confirm.
The display shows: EnA.
tl
FUNCTION
: colour disc step time
S
E
ENTER
SELECT
l
Press UP-DOWN to
select tl function.
Press ENTER to access
the function.
S
E
ENTER
SELECT
3
Press UP/DOWN to
select the step time for
colour disc movement:
3 - 6 - 12 - 24 - 60 - 120
- 240 - 360.
Press ENTER to confirm.
The display shows: tl.
S
E
ENTER
SELECT
A
H E
Press UP-DOWN to select
HEA function.
Press ENTER to access
the function.
The display shows one of
the two following modes:
Au - Snd.
S
E
ENTER
SELECT
A u
Press UP/DOWN to
define the Pan and Tilt
operating mode:
Au
Automatic movement according to the speed to be set
in SPd function (Pan and Tilt movement speed).
Snd Movement according to music (SOUND TO LIGHT).
Press ENTER to confirm. The display shows: HEA.
S
E
ENTER
SELECT
H I
Press UP/DOWN to
select the maximum
position (HI) for Pan
movement.
Press ENTER to confirm.
PAn
FUNCTION
: horizontal movement angle
S
E
ENTER
SELECT
n
P A
Press UP/DOWN to
select PAn function.
Press ENTER to access
the function.
S
E
ENTER
SELECT
L 0
The display shows the
minimum position (LO)
for Pan movement.
Press ENTER to
confirm.
S
E
ENTER
SELECT
5
5
Press UP/DOWN to
select a value between 0
(corresponding to 0°) and
255 (corresponding to
360°).
Press ENTER to confirm.
The display shows: LO.
COL
FUNCTION
: colour disc operating mode
SEL
FUNCTION
: colours selection
S
E
ENTER
SELECT
E n A
S
E
ENTER
SELECT
S A
S
E
ENTER
SELECT
C 1
S
E
ENTER
SELECT
O n
S
E
ENTER
SELECT
C O L
S
E
ENTER
SELECT
r A
S
E
ENTER
SELECT
S E L
The display shows: C1
(colour 1).
Press ENTER to confirm
C1 colour.
Press UP/DOWN to
select ON or OFF in order
to enable/disable the
colour in the sequence.
Press ENTER to confirm.
Press UP-DOWN to
select COL function.
Press ENTER to access
the function.
Press UP-DOWN to
select the colour disc
operating mode:
S
E
ENTER
SELECT
S E L
Press SELECT to return
to SEL function at the
end of operation: colour
selection.
Press UP/DOWN to
select SEL function.
Press ENTER to access
the function.
1)
SE
(positioning on selected colours with SEL function)
2)
rA
(low-speed rotation through all colours)
3)
Au
(random positioning on colours)
Press ENTER to confirm. The display shows: COL.
N.B.: After having selected the mode you desire, carry out only
the appropriate programming as indicated in items 1) 2) 3).
N.B.: These steps should be repeated for all 7 colours (C1÷C7).
C1 = white - C2 = red - C3 = yellow - C4 = violet
C5 = green - C6 = orange - C7 = blue
Press UP/DOWN to select the colours.
Press ENTER to access
EnA operating mode.
The display shows one
of the three following
modes: SLA - SA - SAt.
Press UP-DOWN to
select the mode you want:
(SA): STAND-ALONE
(SAt): MASTER
Press ENTER to confirm.
The display shows: EnA.
1 -
SE
MODE
Program SEL, LA and tl functions with the SE mode.
LA
FUNCTION
: lamp operation
Press UP-DOWN to select
LA function.
Press ENTER to access
the function.
The display shows one
of the three following
modes: On - SLO - FSt.
Press UP/DOWN to
define the lamp
operating mode:
• On the lamp always
stays on
S
E
ENTER
SELECT
L A
S
E
ENTER
SELECT
O n
• SLO (slow)
the lamp turns on and off gradually during
colour change
• FSt (fast)
the lamp turns on and off rapidly during
colour change.
Press ENTER to confirm. The display shows: LA.
The display shows one of the three following modes:
SE - rA - Au.
2 -
rA
MODE
Program the rAI function with the rA mode.
3 -
Au
MODE
Program LA and tl functions with the Au mode.
See 1 -
SE
MODE.
PROGRAMMING
N.B.: If you have chosen SLO as the lamp’s operating mode,
the projector will automatically set the time for 12 seconds.
You cannot set a shorter time.