Clay Paky SUPER SCAN ZOOM - Manual (Page 3)

11
6 5 4 3 2 1
ON
+
COL COL COL
NORMAL
PA
N
TIL
T
OFF
EXP
ANDED
0
1
2
3
4
5
6
7
8
9
10
The response of the iris to the
movement of the potentiometer is
linear and continuous through
0…25% of the adjustment range,
within which the slider can be
stopped in any position to obtain
the desired aperture diameter.
From 25% to 100% the diameter
remains fixed.
From 25% to 75% the gobo
rotates through 540° (1° turns).
From 75% all’87% the gobo turns
more quickly at first, then slows
down to a complete stop.
From 87% al 100% the gobo
begins turning in the opposite
direction, slowly at first and then
more quickly.
100% 100%
87%
75%
25% 25%
0%
• IRIS/GOBO ROTATION (12 channel operation) - channel 1
0°
360°
540°
STOP
OPTIONS
Having completed all the operations
indicated thus far, loosen the knobs (5),
manoeuvre the projector on the bracket
(7) until the beam is directed at centre
stage, then retighten the knobs (5).
• Adjusting the mirror head
The beam can be positioned not only by
moving the entire projector, but also by
adjusting the mirror head.
To do this, loosen the three knobs (20),
turn the mirror head to the desired posi-
tion, and retighten the knobs.
7
5
20
180°
CHANNEL FUNCTIONS AND OPTIONS 5
Select the options by setting the dip-switches as indicated.
POSITIONING THE PROJECTOR 4
• Alignment procedure
Before positioning the projector, set the channels as shown in the following table:
CHANNEL
1 IRIS/GOBO ROTATION
2 COLOUR EFFECTS WHEEL
3 GOBO SELECTION
4 DIMMER/STOPPER/STROBE
5 PAN
6 TILT
7 FROST/PRISM SELECTION AND ROTATION
8 ZOOM
9 FOCUS
10 CYAN
11 MAGENTA
12 YELLOW
POSITION OF SLIDER
100% (maximum aperture)
-
-
100 % (white beam)
50%
50%
0 % (white beam)
-
-
100% (white beam)
100% (white beam)
100% (white beam)
025
DIGITAL START ADDRESS SELECT
OPTION SELECT
DIGITAL INPUT LEDS
1 16 1 2 4 8 16 128 32 64 TEST 256
ON
1 2 4 3 6 5 7 8 10 9
DIGITAL INPUT
109-120 Projector - Channels 10
97-108 Projector - Channels 9
85-96 Projector - Channels 8
73-84 Projector - Channels 7
61-72 Projector - Channels 6
49-60 Projector - Channels 5
37-48 Projector - Channels 4
25-36 Projector - Channels 3
2
1
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
1 2 4 8 16 32 64 128 256 TEST
OFF
ON
OFF
ON
Projector - Channels 13-24
1-12 Projector - Channels
CODE
OFF
ON
• Projector address codes
A single SUPER SCAN ZOOM projector utilizes 12 (Normal) or 16 (Expanded)
control channels. To ensure that the different projectors are addressed correctly
by the controller, a code must be assigned to each one.
The operation is carried out on each SUPER SCAN ZOOM by setting the dip-
switches as indicated in the table below.
Setting the TEST switch to the ON position for a few seconds with the projector pow-
ered-up, an auto-reset routine is carried out. Leaving the TEST switch at the ON posi-
tion for a longer period, a full self-test program will be completed; once the operation
has terminated, return the switch to the OFF position.
• IRIS (16 channel operation) - channel 1
0
1
2
3
4
5
6
7
8
9
10
The response of the iris to the move-
ment of the potentiometer is linear and
continuous through the full 0…100%
range, so that the slider can be
stopped in any position to obtain the
desired aperture diameter.
100%
0%
IRIS
COLOUR EFFECTS WHEEL
STATIC GOBO SELECTION
DIMMER/STOPPER-STROBE
PAN
TILT
FROST
ZOOM
FOCUS
CYAN
MAGENTA
YELLOW
ROTATING GOBO SELECTION
GOBO ROTATION
PRISM SELECTION
PRISM ROTATION
12 CHANNEL OPERATION
(option 4 OFF)
16 CHANNEL OPERATION
(option 4 ON)
CHANNEL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
IRIS/ GOBO ROTATION
COLOUR EFFECTS WHEEL
STATIC GOBO SELECTION
DIMMER/STOPPER-STROBE
PAN
TILT
FROST/PRISM SELECTION AND ROTATION
ZOOM
FOCUS
CYAN
MAGENTA
YELLOW
ENGLISH
Spotlight selection