Clay Paky GLOW UP - Manual (Page 12)

12 GLOW UP
Press ENTER A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
• MASTER OUTPUT: GlowUp runs as a Master
Press ENTER
A and use the UP B and DOWN C keys to select
come si desidera che venga trasmesso il segnale DMX ad altri
apperecchi:
Cable+Wireless
Cable
Wireless
Press ENTER
A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
• REPEATER: GlowUp runs as a repeater
Press ENTER
A and use the UP B and DOWN C keys to select
how to run GlowUP as a repeater: :
Direction – Press ENTER
A again and use the UP B and DOWN C
keys to select whether the repeater should transmit the DMX signal from:
-Wireless to Cable
-Cable to Wireless
Press ENTER
A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
Function– Press ENTER A again and use the UP B and DOWN
C keys to select whether the repeater should run from:
- Repeat & Play (Il GlowUp ripete ed esegue)
- Repeat Only (Il GlowUp funziona solo come ripetitore)
Press ENTER A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
Enable/Disable
Press ENTER
A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
COLOR TEMP (GLOWUP TW)
Allows the user to select the color mixing system.
1) Press ENTER
A – current settings appear on the display.
2) Use the UP B and DOWN C keys to select Independent mode or
Constant intensity mode or Max intensity mode.
3) Press ENTER A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
FIXTURE ID
Allows you to display the GlowUP ID address.
1) Press ENTER
A – the ID address appears on the display.
DISPLAY
Allows you to dim the display backlight 60 seconds after switching to idle
status. To turn it back on, simply press any key.
1) Press ENTER
A – current settings appear on the display.
2) Use the UP B and DOWN C keys to turn display backlight OFF or ON.
3) Press ENTER A to confirm the selection (the display blinks for
several seconds) or SELECT S to keep the current settings and
return to the previous Menu.
CONTRAST
Lets the user modify display contrast.
1) Press ENTER
A – current settings appear on the display.
2) Use the UP B and DOWN C keys to modify the value from 0 to 10
according to the desired contrast.
3) Press SELECT S to return to the previous Menu.
Continued ➔
Color
temperature
(TW only)
Display
Fixture ID
Contrast