Clearaudio Innovation Compact + Stroboscope Testrecord - Manual (Page 2)

Innovation Compact
User manual
Page 1  Clearaudio electronic GmbH 2015
Dear Clearaudio customer,
Congratulation’s to your choice of the Innovation-Compact turntable, a world class
turntable, handmade in Germany by Clearaudio electronic GmbH.
Resonance minimizing chassis sandwich construction in combination with the innovative
motor unit (low noise level and high turning moments), guarantees total isolation of
resonances from the turntable chassis, providing the best music reproduction and authentic
High End imaging. A high precision, maintenance free sinter bronze bearing is completing
the analogue pleasure.
The Clearaudio patented CMB-Bearing-Technology, an inverted bearing with jewelled and
polished ceramic bearing shaft and a bronzed liner, provides frictionless analog enjoyment.
Please read this instruction manual carefully, to avoid any damages or loss of warranty.
This manual will help you for an easy set-up and guarantees the highest pleasure for a long
time.
We wish you a lot of musical enjoyments with your new Clearaudio
Innovation Compact -turntable.
Clearaudio electronic GmbH
This section must be read before any connection is made to the mains supply.
CE-MARKING
The Clearaudio Innovation Compact meets the regulations concerning
electromagnetic disturbance (EMC) and low-voltage appliances.
EQUIPMENT MAINS WORKING SETTING
Your Clearaudio product has been prepared to comply with the household power and safety
requirements that exist in your area. This product can be connected to 230 V or 110 V AC
(50 Hz and 60 Hz).
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator.
Please acknowledge the information given in the
-
Copyright Act 1956,
-
Dramatic and Musical Performers Act 1958,
-
Performers Protection Acts 1963 and 1072,
-
any more recent legal regulations.
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked flame sources, such as lighted candles, should be placed on the equipment
.