Connerton Model A-4F - Manual (Page 4)

Installing Bottom Griddle Plate:
1. Position bottom griddle plate onto drawer frame
with grease chute facing rear of broiler.
Installing Radiants:
1.
2.
3.
NOTE:
Carefully remove radiant from it’s shipping
container.
Position radiant over top burner, lower radiant onto
burner, aligning holes in the top of the radiant with
the tabs extending from the burner.
Check radiant to make sure that it is centered and
resting on top of the burner, held in position by the
tabs on the burner.
DO NOT FORCE RADIANT ONTO BURNER.
This will cause the radiant to break. If the radiant
does NOT fit gently onto burner, contact the
Factory or your factory representative.
Radiants are made from ceramic
material and are easily chipped or broken.