Custom Autosound Slidebar Series Radios - Manual (Page 9)

8 11
Function See FIG.3 Radio Mode USB/CDC Mode
Pre-set 2
Recall/
Store
4
Press to select the #2 radio
preset.
Press and hold to store pre-
set 2 into memory.
Press to play 10 seconds of
each track on the flash drive
or CDC
Press again to cancel the pre-
view scan function.
Preview Scan
Pre-set 3
Recall/ Store
5
Press to select the #3 radio
preset.
Press and hold to store pre-
set 3 into memory.
Press to randomly play all digi-
tal tracks on your flash drive or
CDC.
Random
Pre-set 4
Recall/ Store
6
Press to select the #4 radio
preset.
Press and hold to store pre-
set 4 into memory.
Press to move UP through
folders on your flash drive. The
first file in the selected folder
will play. The screen will dis-
play FOLDER NAME, etc.
ON CDC: DISC UP
Select Folder
Select Disc
Pre-set 5
Recall/Store
7
Press to select the #5 radio
preset.
Press and hold to store pre-
set 5 into memory.
Press to move DOWN through
folders on your flash drive. The
first file in the selected folder
will play. The screen will dis-
play FOLDER NAME, etc.
ON CDC: DISC DOWN
Select Folder
Select Disc
Next/Previous
8
Turn the right front knob to
tune to the next or previous
AM/FM frequency. Turn the right front knob to
change to the next/previous
track.
Audio Adjust
8
Press the right front knob to activate the SEL(Select)func-
tion. Press repeatedly to cycle through the DSP(Digital
Signal Processing)EQ. Bass, Mid, Treble, Balance, Fader,
Loudness. Subwoofer and subwoofer specific adjustments
(when SUB ON is selected). Turn the left front knob to
select a value.
FADER
The fader control allows you to fade
the sound from the front pair of speak-
ers to the rear pair of speakers.
Adjustment range is 0-20 between
front and rear speakers.
Loudness
This function boosts bass and treble
according to the volume. You will know
this function is active when you see
“LOUD” on your display. This function
boost bass and treble for low listening
volume and should be turned off at
higher volumes.
SUB ON/OFF
Turn the subwoofer RCA output ON to
activate this feature.
SUB VOL
When SUB ON is selected and a sub-
woofer is attached to the sub out RCA,
use this function to increase or
decrease the volume level of the sub-
woofer outputs from 0-12.
SUB (55h / 85h / 120h / 160h
When SUB ON is selected and a sub-
woofer is attached to the sub out RCA,
use this function to adjust the sub-
woofer crossover point to 55HZ, 85HZ,
120HZ or 160HZ. Use the left knob for
adjustment.
BASS / MID / TREBLE X-Over This Menu does not come up when the EQ is set to
anything other than OFF.
BASS
Use this function to make a more
detailed boost or cut adjustment of
bass (low) frequencies as fol-
lows:60/80/100/120Hz.This is a very
useful mode for making very specific tonal adjustments. When selecting one of these
60/80/100/120Hz points, any changes to the prior BAS Menu settings on page 10 (-12 to
+12) will boost or cut at the selected frequency setting chosen in this menu.
PRESS TURN
PRESS TURN
PRESS TURN
PRESS TURN
PRESS TURN
PRESS TURN
Slidebar Manual_new_USA-5_manual_peter 1/23/2014 9:19 AM Page 9