Local config function description – Dahua Technology Mobile Phone Monitor User Manual
Page 32
Advertising
30
Figure 3- 34
3.9.1 Local Config Function Description
1. PTZ
Here you can set step length of PTZ, and it ranges from 1 to 8.
2. Snapshot
Here you can config quantity of snapshot and set 1/3/5 continuous snapshot.
3. Push
Here you can set playback length of push info. There are 15s, 30s, 1min, 2min and 5min
modes.
4. Certificate
Here you can update the certificate in case you cannot log in device due to piracy.
5. Password Protection
Here you can set password for the smart phone monitor software. When you have set a
password, at each login, you are required to input the correct password. In case you lost the
smart phone, this protection will prevent others to view contents of monitoring channels.
Advertising