DaySequerra M4.2S User Manual
Page 17
17
M4.2S User Manual
WebServer
Provides full access to the M4.2S remotely via web browser.
A network connection or crossover cables is required for this feature. Crossover cables may be used
when a Network connection is not available. Power ON the M4.2S and open a web browser. Type the
IP address of the M4.2S in the URL to open the WebServer.
Two tabs are displayed at the top of the WebServer – Tuner and Settings
Tuner – is the main page that controls Frequency Tuning, Presets, Multicast, Forcing Analog / Digital
and displays the Alarm Status of the M4.2S. When Album art and PAD/SIS/RBDS data is available it is
also displayed under this tab.
Settings – Allows the user to remotely configure all of the Alarm conditions, Email and network settings.
An about window displays the M4.2S Serial and Firmware number and Box ID. Firmware Upgrades
can be performed by checking the ‘Check for Update’ box. The most recent M4.2S user manual is also
available for download by checking its box.
Tuner Tab
Figure 15.