Ditch Witch AT Air Hammer User Manual
Page 8
CMW
®
All Terrain Air Hammer
Attachment Operator’s Manual
Publication number: ID0273478; page 8 of 11
8.
Remove bit bearing/lock ring/piston assembly by
slamming casing (8) on a block of wood.
Disassemble parts as shown.
9.
Using a pry bar or screwdriver, pry up on the valve
cap where shown on both sides to remove.
10. Slam remaining parts of valve/distributor/cylinder
assembly on piston (7) until valve and distributor
separate from the inner air cylinder.
Assemble
1.
Press valve (11) firmly into valve cap (12).
2.
Press distributor (10) firmly into inner air cylinder (9).
Crushing weight could cause death
or serious injury. Use proper procedures and
equipment or stay away.
To help avoid injury:
•
Use proper lifting equipment and lifting procedures.
•
Use team lifting when necessary.
5. bit bearing
7. piston
6. lock ring
5
6
7
8
a38om010t.eps
a38om011t.eps
a38om012t.eps
a38om013t.eps
11
12
a38om014t.eps
9
10