Mix drilling fluid, If necessary, choke cold engine, Move throttle to half open – Ditch Witch FM13V User Manual
Page 30
Advertising
30
FM13V - OPERATION
Mix Drilling Fluid
30
FM13V - OPERATION
Mix Drilling Fluid
Mix Drilling Fluid
1. Ensure valve in suction line and at least one valve on the
pressure side of the pump is open.
2. If necessary, choke cold engine.
3. Move throttle to half open.
4. Turn ignition switch to start position and release when engine
starts.
IMPORTANT If battery is dead, turn key to ON and pull start
rope.
Mix Drilling Fluid
1. Ensure valve in suction line and at least one valve on the
pressure side of the pump is open.
2. If necessary, choke cold engine.
3. Move throttle to half open.
4. Turn ignition switch to start position and release when engine
starts.
IMPORTANT If battery is dead, turn key to ON and pull start
rope.
Advertising