Dv Mark OVER MARKER - Manual (Page 3)

03
2. CONTENTS
IntroductIon 3
FunctIon overvIew 4
connectIons 4
tecHnIcAL sPecs 5
BLocK dIAGrAM 5
user settInG cHArt 5
congratulations on your purchase of the dv Mark over Marker!
we are very proud of the high quality standard that we’re able to offer thanks to our 100% Made in Italy production, state-of the-art testing and quality control facilities, and top-
quality components. Most guitarists already have at least one distortion/overdrive pedal—but the over Marker is a welcome addition to any pedal board!
this manual will help you get the most out of your over Marker pedal. If you have any questions after reading it, we invite you to contact us any time with your comments and
questions at: [email protected].
thank you again, and enjoy your dv Mark over Marker!
3. IntroductIon
the dv Mark over Marker offers a practical range of sounds, from mild crunch to wild lead distortion, and its versatility makes it useful for any musical style. It always honors your
guitar’s voice, providing very dynamic, touch-sensitive response and a large output range.
Like all our pedals, this unit features “true bypass”: that means that when the over Marker is ‘off’, your signal goes directly from the input jack to the output jack without any
degradation of audio quality.
start by running a cable from your guitar to the over Marker input jack, and run another cable from the pedal output to your amp, setting the over-d and LeveL controls to the 12
o’clock position and with the tone controls off. turn on the effect by stepping on the footswitch, and dial in the amount of distortion desired by adjusting the over-d knob. Adjust
the tone as you like with the tone knobs, and use the LeveL knob to set the desired volume level of the effect.