Dynavector DV 501 tonearm - Manual

Dynavector DV501 Tone arm Instruction Manual
INDEX
Here appears the new bi-axis tone arm
Dynavector DV501 designed on the same
theoretical base of DV505 which are recognized
and appreciate highly by their outstanding
performance and thus given the Design and
Engineering Award at C.E.S. Chicago 1977. And
now again, DV501 has been awarded the similar
prize at C.E.S. Chicago in1982 for its highly
advanced technology.
1. Foreword
2. Parts illustration
3. Installation to turntable
4. Output line connection
5. Cartridge installation and
adjustments
6. Specifications
1. Foreword
Thank you for choosing Dynavector products. DV501 is a specially designed tone arm which can
reproduce the signal on disc without influence caused by disc warp. In order to perform its unique
specifications Including bi-axis inertia separation to vertical and lateral directions, the DV501 has a
more complicated structure compared to conventional tone arms.
However, it is quick and easy to set up, provided that you should read this instruction manual carefully
first.
2. Parts illustration