Eagle Tree Spektrum(TM) / JR(TM) Interface User Manual
Page 3
Copyright © 2007, 2008 Eagle Tree Systems, LLC
http://www.eagletreesystems.com
Page 3
To configure the Interface to display Receiver performance parameters on your Seagull Wireless Dashboard, select “Tools, Choose
Parameters to Display on Seagull Wireless Dashboard LCD” and just choose the Spektrum™ parameter(s) you wish to display. See your
Seagull manual for more information on configuring Seagull parameters.
Note that in addition to being able to program an audible “High Alarm” with each of the Spektrum™ parameters and specifying how many
errors triggers the alarm, you can also check the “Reset the alarm count every one minute” option. With this option, the error count for that
parameter is reset every minute. If you are flying for a long time, or in an environment with lots of RF noise, this may be desirable to keep
the alarm from going off unless you get a lot of receiver errors in a short time.
Troubleshooting
Below is a list of problems that may be encountered, and steps to remedy them. If your particular issue is not addressed by the below, see
the Support page on
http://eagletreesystems.com
or email
. Include a full description of your problem, your
machine configuration, brands/models of receivers, transmitters and servos, Windows Application and Recorder firmware version if possible,
and any other relevant details.
Issue: I do not see the Spektrum™ interface options displayed in the software.
Solutions:
•
Ensure that you have updated the Windows application to version 6.06 or greater, as described above, and that you have updated your
firmware.
•
Make sure you have enabled the Spektrum™ interface as described in the software configuration section above.
Issue: AR9000™ Data is not being recorded.
Solutions:
•
Ensure that you have selected logging of AR9000™ parameters as described in “Logging Interface Data”
above
.
•
Ensure that the Interface cable is correctly connected between the Recorder/eLogger and the Data port of your receiver.
Issue: AR9000™ Data is not being displayed correctly on the Seagull Dashboard.
Solutions:
•
Ensure that you have enabled Seagull display of Spektrum™ parameters as described in “Displaying Interface Data on the Seagull
Dashboard”
above
.
•
Ensure that the Interface cable is correctly connected between the Recorder/eLogger and the Data port of your receiver.
Issue: The Spektrum™ interface does not appear to be working with my Data Recorder (not eLogger V3)
Solution:
•
Ensure that are powering the Data Recorder with a power source less than about 5.5V
Spektrum and Flight Log are trademarks of Horizon Hobby, Inc. JR is a trademark of JR, Inc.
Limited Warranty
Eagle Tree Systems, LLC, warrants the Interface cable to be free from defects in materials and workmanship for a period of one (1) year from the date of
original purchase. This warranty is nontransferable. If your unit requires warranty service during this period, we will replace or repair it at our option.
Shipping cost to us is your responsibility. To obtain warranty service, email
for further instructions.
This limited warranty does not cover:
•
The Software. See the Software license agreement for more information on Software restrictions.
•
Problems that result from:
o
External causes such as accident, abuse, misuse, or problems with electrical power
o
Servicing not authorized by us
o
Usage that is not in accordance with product instructions
o
Failure to follow the product instructions
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE (OR JURISDICTION TO JURISDICTION). OUR RESPONSIBILITY FOR MALFUNCITONS AND DEFECTS IN HARDWARE IS LIMITED
TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED WARRANTIES FOR
THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED WARRANTY PERIOD AS DESCRIBED
ABOVE. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE LIMITED WARRANTY PERIOD HAS EXPIRED.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY
TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRD-PARTY CLAIMS AGAINST YOU FOR
DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR LIABILITY WILL BE NO