Eagle Tree Guardian Stabilization Expander User Manual

Eagle Tree Audio accessories

Advertising
background image

Copyright © 2011 Eagle Tree Systems, LLC

1

http://www.eagletreesystems.com

Instruction Manual for Guardian

TM

Stabilization Expander

Document Version 1.9

Corresponds to Eagle Tree Software Version 10.01 or higher

Contents

Introduction ............................................................................................................................................................................ 1

Connection and Mounting ...................................................................................................................................................... 2

Important Differences in OSD Pro Configuration when using Stabilization ........................................................................... 2

Guardian Stabilization On-screen Menus ............................................................................................................................... 3

Guardian Configuration .......................................................................................................................................................... 4

The Servo Analysis Wizard ................................................................................................................................................................................................................ 4

Reset Cruise Sticks/Throtl .................................................................................................................................................................................................................. 4

Tuning Stabilization Gains ....................................................................................................................................................... 4

Stabilization Theory ........................................................................................................................................................................................................................... 4

Stabilization “Master Gain” Knob ...................................................................................................................................................................................................... 5

Displaying the Master Gain Onscreen ................................................................................................................................................................................................ 5

Oscillations ........................................................................................................................................................................................................................................ 5

Additional Features ................................................................................................................................................................. 5

Center-Stick Only Stabilization .......................................................................................................................................................................................................... 5

Heading Hold (Recommended) .......................................................................................................................................................................................................... 6

Preflight ................................................................................................................................................................................... 6

First Flight ................................................................................................................................................................................ 6

Troubleshooting ...................................................................................................................................................................... 6

Introduction

Thank you for your purchase! This instruction manual will guide you through the installation and operation of your Guardian Stabilization Expander. The latest
version of this manual is available in the Product Manuals section of the Support tab on

http://www.eagletreesystems.com

. The online manual includes any updates that

were made after your Guardian was purchased. Please read the entire manual carefully before proceeding. If, after you read the manual, you have further questions or
problems, see the “Have Questions or Feedback?” section below.

What the Guardian Does
When used with the Eagle Tree OSD Pro

TM

, the Guardian provides full featured inertial stabilization, and an on-screen Artificial Horizon display. No additional

sensors are required.
The Guardian requires no warm-up period after your model is powered. The Guardian’s advanced features make it easy for you to perform aerobatic maneuvers (if you
are capable!) and immediately return to stabilized flight when desired.
The Guardian is a stabilizer, not a stall-preventer! In some airframes, stalling can create unrecoverable conditions, such as spins, that may result in a crash.

Intended Uses

The Guardian is intended to be used exclusively for recreational purposes in model planes, boats and cars. Any other use is not supported.

Packing List

Your package should include the following: The Guardian, and a printed version of this manual.

Other Things You Need
To utilize the Guardian, you will need the OSD Pro system with an eLogger V3 or V4. NOTE: The Guardian is NOT compatible with our Flight Data Recorder
products! Though stabilization will work without them, a video camera and video transmitter on your model, and a video receiver and video display on the ground are
normally required. Many Eagle Tree FPV dealers sell the required video equipment. A list of our FPV dealers can be found on our website at

http://www.eagletreesystems.com/OSD/OSD-Pro.htm

.

Steps to Follow

Installation and use of your Guardian should be quite easy and enjoyable if you follow these few steps:

1.

First, if you have not done so already, read through the manuals for your OSD Pro, eLogger, GPS Expander, and any other Eagle Tree sensors, to familiarize
yourself with the connection and function of these devices, and set this equipment up.

2.

Read through this manual to understand the warnings, determine the installation and setup sequence, pre-flight tests, etc., of the Guardian.

3.

If anything is unclear, see the “Have Questions or Feedback?” section below.

4.

Range test and enjoy!

Advertising