Eagle Tree PowerPanel LCD - Manual (Page 4)

Copyright © 2006-2012 Eagle Tree Systems, LLC
Page 4
•
Click, “Reset Parameters” in the PowerPanel configuration page, and set up the parameters again.
•
Make sure the sensor for the parameter being displayed is correctly connected and installed on your model. For example, RPM will read zero
if the RPM sensor is not connected. See the eLogger or sensor manuals for specific sensor information.
•
Try removing power from and restoring power to the eLogger.
Issue: I have the eLogger connected to USB, but do not have a battery pack connected to the eLogger. The PowerPanel shows a nonzero voltage,
however.
Solution: This is normal. Connecting a battery pack to the eLogger will result in correct display voltage.
Issue: I have the eLogger connected to USB, but do not have a battery pack connected to the eLogger. The PowerPanel display is very dim.
Solution: This is normal. Connecting a battery pack to the eLogger of 6V or greater will increase the LCD contrast.
Issue: The Max values and “Cumulative mAH” feature of the PowerPanel is not working correctly. I get low mAH readings after my session.
Solution: The PowerPanel remembers the Max values only during a single session. Once the eLogger is disconnected from power, the Max values
are cleared. But, disconnecting the PowerPanel from the eLogger does NOT clear the max values.
PowerPanel Specifications
Display: 16x2 Character LCD
Dimensions: Approximately 2.5” x 1” x 3/16” thick (6.5cm x 2.7cm x 4mm thick)
Weight: Approximately 0.5oz (14 g)
Length of Cable: Approximately 11” (28cm) - extendable with our “PowerPanel Extension Cable” on the eLogger page of our website.
Limited Warranty
Eagle Tree Systems, LLC, warrants the PowerPanel to be free from defects in materials and workmanship for a period of one (1) year from the date of
original purchase. This warranty is nontransferable. If your unit requires warranty service during this period, we will replace or repair it at our
option. Shipping cost to us is your responsibility.
To obtain warranty service, contact us by phone, fax or email to request an RMA number. No returns will be accepted without this number.
This limited warranty does not cover:
•
The Software included with the eLogger. See the Software license agreement for more information on Software restrictions.
•
Problems that result from:
o External causes such as accident, abuse, misuse, or problems with electrical power
o Servicing not authorized by us
o Usage that is not in accordance with product instructions
o Failure to follow the product instructions
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE (OR JURISDICTION TO JURISDICTION). OUR RESPONSIBILITY FOR MALFUNCITONS AND DEFECTS IN HARDWARE IS
LIMITED TO REPAIR AND REPLACEMENT AS SET FORTH IN THIS WARRANTY STATEMENT. ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN TIME TO THE TERM OF THE LIMITED
WARRANTY PERIOD AS DESCRIBED ABOVE. NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
LIMITED WARRANTY PERIOD HAS EXPIRED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
WE DO NOT ACCEPT LIABILITY BEYOND THE REMEDIES PROVIDED FOR IN THIS LIMITED WARRANTY OR FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LIABILTY FOR THIRD-PARTY CLAIMS AGAINST YOU FOR
DAMAGES, FOR PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST DATA OR LOST SOFTWARE. OUR LIABILITY WILL BE
NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM
AMOUNT FOR WHICH WE ARE RESPONSIBLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.