Warning, Troubleshooting and repair – EarthQuake CS3814 User Manual

Page 21

Advertising
background image

Check for parts online at

www.getearthquake.com or call 800-345-6007 M-F 8-5

21

Operator's Manual

CS3814, CS3816, CS4116 Chainsaws

trouBleshooting and repair

trouBleshooting guide

While normal care and routine maintenance will extend the life

of your chainsaw, prolonged or constant use may eventually

require that service be performed to allow it to continue oper-

ating properly. The troubleshooting guide below lists the most

common problems, causes and remedies.

Warning

practice safety at all times. engine must Be

turned off and alloWed to cool, and spark

plug Wire must Be disconnected and secured

Before attempting any maintenance or repair.
failure to comply With this safety reQuirement

can result in serious personal injury to you

or Bystanders.

proBlem

cause

remedy

Starting failure

• Check fuel for water or

substandard mixture

• Replace with proper fuel

• Remove and dry the spark plug

• Pull the starter again with no choke

• Replace spark plug with a new plug

Lack of power / Poor ac-

celeration / Rough idling

• Check for water or

substandard mixture

• Check air filter and fuel

filter for clogging

• Check carburetor for

inadequate adjustment

• Replace with proper fuel

• Clean

• Have an authorized service center adjust the

carburetor.

Oil does not come out

• Check oil for substandard

quality

•Check oil passage and

ports for clogging

• Replace

• Clean

If the unit seems to need further service, consult with an authorized service shop in your area.

Advertising