EarthQuake 3365PS - Manual (Page 11)

Operator’s Manual
Front Tine Tiller 3365 Series
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5 CST 11
To prevent accidental starting:
Engine must be turned off and cool, and spark plug wire must
be removed and secured from spark plug before checking
and adjusting engine or equipment.
SERVICING THE ROTOTILLER
The following information will help you make the necessary checks
and perform the procedures required to follow the normal care
recommendations made for your rototiller unit.
If you prefer, your local authorized dealer can make these checks and
perform the required procedures for you.
MAINTENANCE AND STORAGE
MAINTENANCE SCHEDULE
Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you with years
of reliable operation.
Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance.
Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit.
Maintenance Operation Page
Before
Each Use
50 hours or
Every Season
Check belt tension 13 X
Change forward belt 13 X
Engine maintenance 14 X X
Check oil level/change oil 14 X 2
Clean tine axle shaft 14 X
Lubrication 14 X
Check throttle control adjustment - 1
EM = See engine manual
1 Adjust throttle control after first three hours of operation or if engine is hard to start or run-on occurs.
2 Change oil after the first five to eight hours of use, then after every 50 hours or every season. Change oil
every 25 hours when operating under heavy load or in high temperatures.
WARNING
Important: Use only approved Ardisam spare parts.
spark plug wire