EarthQuake W1265V User Manual
Page 15
Operator’s Manual
Viper® 212cc 4-Cycle Engine
Check for parts online at
www.ardisam.com or call 800-345-6007 M-F 8-5
15
FUEL FILTER
Cleaning Or Replacing Fuel Filter
1. Disconnect spark plug wire from spark plug. Remove spark
plug and protect spark plug hole from debris.
2. Drain fuel from tank before attempting to clean/replace filter.
3. Remove two nuts holding muffler to the engine and remove
muffler.
4. Remove single tank bolt from fuel tank assembly.
5. Remove two nuts from underside of tank.
6. Gently lift tank off of the engine and disconnect the hose
clamp. SEE FIGURES 14 and 15.
7. Remove fuel tank filter by using proper size socket to turn
filter counter clockwise. SEE FIGURE 16
8. Filter may be washed with kerosene or similar solvent.
9. If filter is extremely dirty or torn replace with new filter.
8. Reassemble and fill with clean fresh gasoline. Check for leaks
prior to starting engine.
CARBURETOR
• Never tamper with the factory setting of the carburetor.
• Contact your service provider or Viper if adjustment is needed.
FIGURE 14
FIGURE 16
fuel filter
fuel pipe
hose clamp
FIGURE 15
fuel hose