East Coast Supercharging ECS Paxton SC1500 C5 Supercharger Kit - Manual

www.EastCoastSupercharging.com
Phone 609-752-0320 • Fax 609-752-0321
1
Directions for Installation of ECS Paxton Supercharger Kit
• Disconnect battery
• Remove stock serpentine belt
• Remove stock belt tensioner, save the 2 bolts for later use on supercharger bracket
• Remove alternator
• Remove cap from coolant reservoir and drain anti-freeze
• Remove stock air bridge & filter assembly saving the MAF sensor for later
• Remove upper radiator mount
• Remove bottom air dam from radiator support, save the four 10mm bolts for later use
• Remove front radiator shroud by taking all the 7mm bolts out (Figure 1)
• Remove front tires
• Remove front sway bar
• Remove electric cooling fans