East Coast Supercharging ECS Half Shaft Loops - Manual (Page 3)

10. Make sure the bracket is centered
on the CV shaft and tighten both of
the 7/16 bolts.
11. Slide the U bend over the CV
shaft and insert the 7/16 x 3 ¾ bolt
with supplied flat washers and lock-
nuts into the main bracket. (Fig 5)
12. Tighten the U bend bolt.
13 . Retighten the leaf spring bolts
by turning the bolt the same
number of turns that were loos-
ened in step 4.
Thank you purchasing the ECS Halfshaft Loop Kit.
Any questions feel free to call the shop at 609-752-0321.
Fig 4
Fig 5