Easyrig 3 Gimbal Rig - Manual (Page 5)

5
Fig. 1
Unlatch the buckle and unfold the support arm.
Fig. 2
Let the tube attatched to the support arm slide
into the lower tube section and pull over the
bellows.
Fig. 3
Put on your Easyrig 3 gimbal rig. Adjust the hip
belt until you find the rig comfortable. Pull the
belt tightly.
Fig. 4
Attatch your camera to the Easyrig. Use your
middle finger to open the hook.
Secure the hook by turning the knob clockwise.
Fasten the safety line.
1
2
4
3
Getting started with
the Easyrig 3 gimbal rig