Easyrig Changing Easyrig mini spring balancer - Manual (Page 2)

2. Remove the plastic cover on the camera hook
and open the knob.
3.Remove the spring balancer by opening the
M4 x 35 mm screw.
4. Put the new feather package in position. 5. Inside the spring balancer is a loose wheel. It’s
important to have it in correct position. By using
the hexagon you can keep the wheel in position.
6. Mount the M4 x 35 screw. When the screw is
through the nut it’s perfect, otherwise the cover can
bend.
7. Mount the line through the arm by using the
spring cord tool.
8. Mount the line through the bend arm over
the wheels.
9. Mount the line through the adjustment block.
1. Remove the plastic cover by
removing the four knobs. Take out
the support bar.