Echelon IzoT Resource Editos - Manual (Page 58)

50 Creating and Modifying Resources
The title of the field may vary (this one is intended for entering comments about the
resource file element being created), but there is always a text field, with New and Link
buttons.
To create a new language string, click New to create a new language string. The text
string will automatically be saved in the active language file.
To link to an existing language string, follow these steps:
1. Click Link. The Link dialog appears. This dialog allows you to choose a string from
the current resource file set, or from any other applicable resource file set.
2. Set Scope to the scope of the resource file set containing the language string. You
can only select a scope value equal to or less than the scope of the current resource
file set. To select a string from the current resource file set, set Scope to the current
resource file set’s scope.
3. Set Index to the language string index. The selected string is displayed in
Resource String.
4. Click OK.
Searching for a Language String
You can search for a language string within a language file. To search for a language
string, follow these steps:
1. In the Resource Editor, right-click a language file and then click Open on the
shortcut menu. The Modify dialog appears as shown in the following figure: