Echelon Mini FX/PL Examples - Manual (Page 16)

8 Using the Mini FX/PL Example Applications
Figure 1.4 Mini FX Application—Service Pin Message Dialog
The Neuron ID is a unique 48-bit (12-hex digit) identifier contained in every
L
ON
W
ORKS
device. The Mini kit uses the Neuron ID to communicate with your
selected device. For more information on Neuron IDs, see the Introduction to the
L
ON W ORKS System document in the Echelon Mini FX program folder.
The Program ID is a unique, 16-hex digit ID that uniquely identifies the device
application.
8. Click Yes to register the device with the Mini FX Application.
9. The PL 3150/PL 3170 EVB device is added to the Device list, which includes devices
that you have added. The device will remain in the Device list until you close the
Mini FX Application, or connect to a new network interface. You will need to add the
device again when you restart the Mini FX Application, or when you connect to a
different network interface.
10. In the Application Image property, click Add, browse to the
L ON W ORKS \NeuronC\Examples\Mini EVB\ReleasedBinaries folder, and then
select the desired Neuron C application image file (.ndl extension). The application
image is added to the list of those recently added and it will remain there even after
you close the Mini kit.