Electrocompaniet ECI 6D - Manual (Page 14)

14
ENG
Important Notice
For optimal sonic performance, the ECI 6D should be burned in for a
minimum time of 72 hours. The easiest way to burn in your ECI 6D is
to put a signal at any input, without the speakers connected In daily
operation, switch off the ECI 6D by using the MUTE button on the remote
control. If the ECI 6D has been switched off, allow two hours of warm-
up to optimal sonic performance. Due to high class A operation in all
Electrocompaniet designs, it is normal for the ECI 6D to feel warm.
Proper ventilation is important. It is important that there is at least 3-5 cm
(1-2inches) of air on the left side of the amplifier and 5-8 cm (2-3 inches)
above. Never cover the ventilation area.
If Service is needed
Your dealer will have all relevant information regarding the service cen-
ters in your area, and will ensure that your unit is serviced with minimum
delay. It is our general policy to have your unit returned to you within
five working days. This is an average time, and can vary locally,
depending on the workload at that particular service station. If, for some
reason, there are no service facilities available in your country, please
ship the unit to the following address:
Electrocompaniet AS,
Breivikveien 7,
N-4120 Tau,
Norway
Web: www.electrocompaniet.com
The end user is responsible for all shipping charges, insurance, re-im-
portation and duty charges. When shipping a product to the factory for
service, always include the following:
1. A sales slip or other proof of purchase if repair is claimed under warranty.
2. A proforma invoice with value of goods, stating that the amplifier is
returned to Norway for repair.
3. An accompanying letter describing faults, symptoms, or problems with
the unit.
4. Always ship the unit in its original carton and packaging material to
prevent damage in transit.
Electrocompaniet will not cover damages incurred in transit. If you
require further information concerning the operation of the unit, or if you
have any questions related to service, please do not hesitate to contact
your dealer or your national distributor.