Electrocompaniet EC4.7 (issue 3) - Manual (Page 5)

Replacing remote control batteries Diagram 5
Replace used batteries by gently inserting your fingernail or small screwdriver in the
groove on the left side of the battery compartment cover.
Lift the cover off and insert a fresh set of batteries.
Be careful to follow the + and – polarity indications at the bottom of the battery compartment.
Battery: 2 x LR03 / AAA: 1.5Volts
Input configurations Diagram 6
XLR input: 1 = ground 2 = positive 3 = negative
RCA: Circle = ground Center = positive
Output configurations Diagram 6 and 1
XLR output: 1 = ground 2 = positive 3 = negative
Speaker: Red = positive Black or White = ground
RCA to XLR adopter: ECP5XLR: 1 & 3; ground and negative = shorted, 2 = positive
GB USA
5