Electrocompaniet ECD 2 - Manual (Page 10)

10
ENG
Important Notice
For optimal sonic performance, the ECD 2 should be burned in for a
minimum time of 72 hours. If the ECD 2 has been switched off, allow
two hours of warm-up for optimal sonic performance. It is normal for the
ECD 2 to feel warm.
A good rule of thumb is to allow at least 3 - 5 cm (1 - 2 inches) of air
sidewise, and 5 - 8 cm (2 - 3 inches) above the ECD 2
If service is needed
Your dealer will have all relevant information regarding the service
centre in your area and will ensure that your unit is serviced with mini-
mum delay. If, for some reason, there are no service facilities available
in your country, please contact Electrocompaniet for assistance:
ELECTROCOMPANIET AS
BREIVIKVEIEN 7
4120 TAU
NORWAY
Web: www.electrocompaniet.no
The end-user is responsible for all shipping charges, insurance and all
reimportation and duty charges. When shipping a product to the fac-
tory for service, always include the following:
1. A sales slip or other proof of purchase if repair is claimed under warranty.
2. A proforma invoice with value of goods, stating that the amplifier is
being returned to Norway for repair.
3. An accompanying letter describing faults, symptoms, or problems with
the unit.
4. Always ship the unit in its original carton and packaging material
to prevent damage in transit. Electrocompaniet will not cover damages
incurred in transit.
If you require further information concerning the operation of the unit or
if you have any questions related to service, please do not hesitate to
contact your dealer or national distributor.