Electrocompaniet PC 1 - Manual (Page 5)

XLR configurations
XLR output:
1 = ground 2 = positive 3 = negative
Technical specifications PC-1
The following technical data were measured on randomized test objects and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
Measurements
Output impedance 100 ohm
Output level 4,5Vrms
Noise floor (0 dB gain) < -120 dB
Frequency deviation < 0.1 dB
Channel separation > 90 dB
THD + N < 0.002%
Digital/Analogue Conversion > 24 bit, 192 kHz
Dynamic Range 96 dB
Power consumption (no load or signal) 22 W
Dimensions
Width
420 mm
Depth 270 mm
Height 77 mm
Weight 3 kg
Specifications subject to change without further notice.