Electrocompaniet PI 1 - Manual (Page 6)

Input configurations
XLR input:
1 = ground 2 = positive 3 = negative
RCA: Circle = ground Centre = positive
Technical specifications PI-1
The following technical data were measured on randomized test objects and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
Measurements
Input impedance 47 kOhm
Output impedance 0,04 Ohm
Noise floor (0 dB gain) < -100 dB
Frequency response 1 – 200 kHz
Channel separation > 120 dB
THD + N < 0.006%
Maximum peak current > 30A
Damping factor > 250
Rated output power THD = 0,2%
8 ohm 2 x 50 W
4 ohm 2 x 75 W
2 ohm 2 x 110 W
Power consumption (no load or signal) 80 W
Dimensions
Width
420 mm
Depth 340 mm
Height 70 mm
Weight 12 kg
Specifications subject to change without further notice.