Elenco 3 1/2 Digit Cap. / Trans. Kit - Manual (Page 23)

-22-
r
Solder the spring to the PC board as shown in
Figure Q.
r
Install the bottom two 2.5 x 8mm screws to the
LCD housing as shown in Figure R.
r
Peel off the protective backing on the top label
(A) and bottom label (B) and stick them to the top
case as shown in Figure S.
r Place the PC board into the bottom case. Feed
the battery clip through the case as shown in
Figure T.
r
Place the four colored sleeves over the input
sockets as shown in Figure T. Note that the black
sleeve goes on the COM socket.
r
Place the red power cap onto the switch SW1 as
shown in Figure T.
Figure R
2.5 x 8mm Screws
Figure S
Top Label (A) Bottom Label (B)
FINAL ASSEMBLY
PARTS LIST - SECTION F
SECTION F
Final Assembly
Qty. Description Part #
r 1 Button (red) 622027
r
3 Sleeve Input Socket (red) 622660
r 1 Sleeve Input Socket (black) 622661
r
1 Case Top 623112
r 1 Case Bottom 623203
r
1 Cover Battery 623210
r 2 Screw LCD Housing 2.5 x 8mm 642239
Qty. Description Part #
r 2 Screw Case 3 x 17.5mm 642240
r
1 Spring 680033
r 1 Label Bottom 723052
r
1 Shield Label 780012
r 1 Holster 9C72
r
1 Test Leads Alligator 9TL13
r 1 Test Leads Red-Black 9TL14
Note: The shield may be installed already.
Figure Q
Solder
Spring
-13-
PARTS LIST - SECTION B
RESISTORS
Qty. Symbol Description Color Code Part #
r 1 R23 .01
Ω
Shunt wire 100166
r
1 R22 0.99
Ω
0.5% 1/4W black-white-white-silver-green 109950
r 1 R21 9
Ω
0.5% 1/4W white-black-black-silver-green 119050
r
1 R20 90
Ω
0.5% 1/4W white-black-black-gold-green 129050
r 1 R18 100
Ω
0.5% 1/4W brown-black-black-black-green 131050
r 1 R32 390
Ω
1% 1/4W orange-white-black-black-brown 133930
r
1 R31 900
Ω
1% 1/4W white-black-black-black-brown 139030
r 2 R17, R19 900
Ω
0.5% 1/4W white-black-black-black-green 139050
r 1 R33 5.6k
Ω
5% 1/4W green-blue-red-gold 145600
r
1 R16 9k
Ω
0.5% 1/4W white-black-black-brown-green 149050
r 1 R30 13k
Ω
1% 1/4W brown-orange-black-red-brown 151330
r 1 R15 90k
Ω
0.5% 1/4W white-black-black-red-green 159050
r
1 R14 900k
Ω
0.5% 1/4W white-black-black-orange-green 169050
r 4 R10-R13 2.25M
Ω
0.5% 1/4W red-red-green-yellow-green 172250
r 1 VR1 200
Ω
(201) Pot (lay down) 191320
Note: Resistor tolerance (last band) of 5-band resistors may be blue instead of green.
SEMICONDUCTORS
Qty. Symbol Value Description Part #
r 2 D1, D2 1N4001 Diode 314001
r 1 T2 2SA9013 Transistor 329013
MISCELLANEOUS
Qty. Symbol Description Part #
r 1 Fuse 200mA 250V 5 x 20mm 530020
r
2 Screw 2.5 x 8mm 642239
r 2 Fuse Clips 663004
r
4 Input Socket (20A,
μ
A/mA, COM, V
Ω
CAP) 664066
SECTION B
DC Voltage & Current Circuit
Pot (lay down)
PARTS IDENTIFICATION
Fuse Fuse Clip Input Socket Shunt Wire