Elenco 3 1/2 Digit Cap./ Freq./ Trans. w/ Grey Boot - Manual (Page 4)

Safety Symbols
This marking adjacent to another marking, terminal, or
operating device indicates that the operator must refer to
the explanation in the operating instructions to avoid
damage to the equipment and/or to avoid personal injury.
This WARNING sign denotes a hazard. It calls attention to
a procedure, practice or the like, which if not correctly
performed or adhered to, could result in personal injury.
This CAUTION sign denotes a hazard. It calls attention to
a procedure, practice or the like, which, if not correctly
adhered to, could result in damage to or destruction of part
or all of the instrument.
This marking advises the user that the terminal(s) so
marked must not be connected to a circuit point at which
the voltage, with respect to earth ground, exceeds (in this
case) 500 volts.
This symbol, adjacent to one or more terminals, identifies
them as being associated with ranges that may in normal
use be subjected to particularly hazardous voltages.
For maximum safety, the instrument and its test leads
should not be handled when these terminals are
energized.
This marking indicates that equipment is protected
completely be the double insulation.
2. Introduction
This meter is a 3 3/4 digit digital multimeter that is rugged, reliable
and convenient to use, while providing all of the accuracy and
features needed for any application. It performs DC/AC voltage,
DC/AC current, resistance, transistor h
FE test, capacitance,
frequency, diode, continuity test, and has Auto Power Off.
It is designed for the professional at work in the field or in the
laboratory, even hobby and home applications.
!
WARNING
CAUTION
500V max.
-4-