Elenco Metal Detector - Manual (Page 2)

PARTS LIST
If you are a student, and any parts are missing or damaged, please see instructor or bookstore.
If you purchased this metal detector kit from a distributor, catalog, etc., please contact ELENCO
TM
(address/phone/e-mail is at the back of this manual) for additional assistance, if needed.
RESISTORS
Qty. Symbol Description Color Code Part #
r 1
R2 4.7k
Ω 1/4W 5%
yellow-violet-red-gold 144700
r 1 R1 15k Ω 1/4W 5% brown-blue-orange-gold 151500
r 1
P1 Trim Pot 50k
Ω
191552
CAPACITORS
Qty. Symbol Description Part #
r 1
C1 680pF Discap (681) 226880
r 1
C2 0.0015
μF Discap (152)
231517
SEMICONDUCTORS
Qty. Symbol Description Part #
r 1
Q1 Transistor MPS5172 325172
MISCELLANEOUS
Qty. Symbol Description Part #
r 1
PC Board 518026
r 1
S1 Switch 541102
r 1
B1 Battery Snap 9V 590098
r 1
Wire #26 Enamel 45’ 846000
-1-
Resistor Transistor Capacitor
PARTS IDENTIFICATION
Switch
Discap
Battery Snap Trim Pot
IDENTIFYING RESISTOR VALUES
Use the following information as a guide in properly
identifying the value of resistors.
IDENTIFYING CAPACITOR VALUES
Capacitors will be identified by their capacitance value in
pF (picofarads), nF (nanofarads), or
μF (microfarads).
Most capacitors will have their actual value printed on
them. Some capacitors may have their value printed in the
following manner.
Second Digit
First Digit
Multiplier
Tolerance
The above value is 10 x 1,000 = 10,000pF or .01 μF
The letter K indicates a tolerance of +10%
The letter J indicates a tolerance of +5%
For the No. 0 1 2 3 4 5 8 9
Multiply By 1 10 100 1k 10k 100k .01 0.1
Multiplier
Note: The letter “R” may be used at times to
signify a decimal point; as in 3R3 = 3.3