Elenco Solder Practice Kit w/ Iron &amp - Manual (Page 2)

Parts List
If you are a student, and any parts are missing or damaged, please see instructor or bookstore.
If you purchased this kit from a distributor, catalog, etc., please contact Elenco Electronics
(address/phone/e-mail is at the back of this manual) for additional assistance, if needed. DO
NOT contact your place of purchase as they will not be able to help you.
Resistors
Qty. Symbol Description Part #
1 R3 68 Ω 5% 1/4W (blue-gray-black-gold) 126800
2 R1, R7 470 Ω 5% 1/4W (yellow-violet-brown-gold) 134700
1 R2 1k Ω 5% 1/2W (brown-black-red-gold) 141001
2 R8, R9 10k Ω 5% 1/4W (brown-black-orange-gold) 151000
1 R5 47k Ω 5% 1/4W (yellow-violet-orange-gold) 154700
2 R4, R6 56k Ω 5% 1/4W (green-blue-orange-gold) 155600
1 VR1 200 Ω Potentiometer 191321
Capacitors
Qty. Symbol Description Part #
2 C4, C5 .02 µF Discap (203) or .022µF (223) 242280
3 C1, C2, C3 10 µF Electrolytic (Lytic) 271045
1 C6 100 µF Electrolytic (Lytic) 281044
Semiconductors
Qty. Description Part #
2 Transistor 2N3904 323904
1 IC 555 or 1455 330555
2 LED Red 350002
Miscellaneous
Qty. Description Part #
1 Printed Circuit Board 511500
1 Battery Snap 590098
1 Speaker 590102
12” Wire 814800
1 Soldering Iron 9SR1
1 Side Cutters 9ST1
1 Solder Roll 9ST4
Figure 1, Parts Identification
-1- -10-
8. When two adjacent foils accidentally touch, it is called
A. a jumper.
B. a blob.
C. a solder hole.
D. a solder bridge.
9. What ratio has the greatest amount of tin?
A. 20/60
B. 40/60
C. 50/50
D. 60/40
10. A good solder connection should be
A. dull and rough.
B. shiny, bright and smooth.
C. lumped around the connection.
D. soldered on one side of the connection.
Answer s: 1.B , 2. C, 3. A, 4.D , 5. B, 6. A, 7.C , 8. D, 9. D, 10. B
Transistor 2N3904 IC 555 or 1455 LED
Resistors Electrolytic Capacitor Ceramic Capacitor
+
1/2W
1/4W
Lytics have
polarity. Note the
marking on the
side before
mounting.