EMM Labs TSDX CD/SACD TRANSPORT - Manual (Page 14)

014 Infrared Remote Control
This function toggles the front panel display to different preset
brightness settings. One of the settings will turn the display OFF
however the TSDX will still continue to function normally.
These buttons can be used to directly access any track on the CD
or SACD directly. To access tracks higher then 9 see examples:
• Track 10 press and hold 1 until you see the display change
to 10 then press 0.
• Track 23 press and hold 2 until you see the display change
to 20 then press 3.
This provides the same functionality as the “M” button on the front
panel (i.e. toggling through CD or SACD playback or SACD stereo
and SACD multi channel playback).
Toggles through Repeat track then Repeat all the Repeat Off.
Starts playback or continues it from Pause mode.
Pauses playback (press PLAY to continue).
Stops playback. Pressing stop a second time within a second
ejects the disc from the TSDX.
Jumps back a track. Press and hold to enter fast rewind mode (exit
mode by pressing PLAY).
Jumps to next track. Press and hold enter fast forward mode (exit
mode by pressing PLAY).
Toggles polarity inversion performed in the digital domain.
DISC :
Numeric Buttons :
MODE :
REPEAT :
PLAY :
PAUSE :
STOP :
|<< :
>>| :
POLARITY :
Infrared Remote Control
The remote control provides combined functions for both the TSDX and EMM Labs
DAC2 or DAC2X converter. The functions that are relevant to the TSDX:
© 2012 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
TSDX CD/SACD TRANSPORT OWNER’S MANUAL