EMM Labs CDSA DISC PLAYER - Manual (Page 8)

CDSA User Manual
Status info from CDSA
The CDSA sends back 10 Bytes terminated with a <CR> whenever any status changes.
Byte 0 Byte 1 Byte 9 <CR>
Byte 0 Seconds ones in ASCII
Byte 1 Seconds tens in ASCII
Byte 2 Minutes ones in ASCII
Byte 3 Minutes tens in ASCII
Byte 4 Hours ones in ASCII
Byte 5 Track number ones in ASCII
Byte 6 Track number tens in ASCII
Byte 7 bit 0 1 when “Reading” indicator is on (front panel)
bit 1 1 when “Repeat Track” indicator is on( front panel)
bit 2 1 when “Repeat All” indicator is on (front panel)
bit 3 1 when “CD PCM 2HC” indicator is on (front panel)
bit 4 1 when “SACD 2CH” indicator is on (front panel)
bit 5 reserved
bit 6 reserved
bit 7 1 when DVD disc is selected (DVD-V or DVD-A)
Byte 8 bit 0 reserved
bit 1 1 when front panel display is off
bit 2 1 when CDSA in Standby mode
bit 3 1 when “No Disc” indicator is on (front panel)
bit 4 reserved
bit 5 reserved
bit 6 1 when in pause
bit 7 1 when audio phase inverted
Byte 9 <CR> (x0D)
8