EMM Labs DAC6e - Manual (Page 4)

4
Clock Section
INT / EXT: Selects internal or external clock source. LOCK LED is lit
when D/A converter is locked to external clock. When in
INT, the DAC6e generates the master clock signal
(master clock mode) for the audio source. Connect either
the BNC or optical clock output from the DAC6 to your
audio souce.
When in EXT (slave clock mode) no additional
connection from the DAC6e to the audio source is
required.
Sample Rate Section
1FS / 2FS: Selects the sample rate for PCM data. FS is the base
frequency (see selector switch for base).
44.1 / 48: Selects the base frequency (only 44.1kHz is allowed for
DSD inputs)
Format Section
DSD / PCM: Selects digital audio input format.
Phase Section
NORM / INV: Selects normal or inverted phase.
Error Indicator Is lit for illegal switch positions
Basic Operation
Conversion from PCM on AES/EBU to Analog
Additional selections for 44.1 / 48 / 88.2 / 96kHz sample rate can be made
with the sample rate switches.
48
INT
EXT
DSD
PCM
NORM
INV
FORMAT PHASE
1FS
2FS LOCK POWER ERROR
44.1
SAMPLE CLOCK