EMP Tek EW35 - Manual (Page 7)

6
Your EW series on-wall speaker comes with
a black grille, but an optional silver grille is
included. Select the grille which best matches
your décor. If you wish to change the grille,
follow these steps:
To remove the grille:
.) Use the smaller hex key tool to remove
the four hex bolts from both end caps of the
speaker;
2.) Remove both end caps;
3.) Firmly grasp both ends of one side of the
grille to gently flex and lift the grille out of the
recessed track.;
4.) Gently pull the other side of the grille from
its recessed track.
To re-insert grille:
.) Insert one side of the grille into the recessed
track on one side;
2.) Firmly grasp both ends of the opposite side
of the grille and gently flex and insert the grille
into the opposite recessed track;
3.) Make sure the grille is centered in the speaker,
and place one end cap onto the speaker;
4.) Place 4 hex head screws through the end
cap and into the speaker and tighten using the
smaller hex wrench;
5.) Repeat step 4 for the opposite end cap.
Changing The Grille