EMP Tek Impressions Series Subwoofer - Manual (Page 2)

9. Hi-Level Output: This is a 100 Hz high-passed output for your satellite/main
speakers. The crossover limits the low frequencies (below 100 Hz) from going to
your satellite/main speakers. This crossover is active only when using the Hi-Level
Input terminals. Connect your main speakers (observing the proper polarity) to
these terminals when using the Hi-Level Inputs.
10. Fuse Access: This is the power fuse access.
WARNING! In the event the fuse must be replaced, the replacement fuse must
match exactly the original fuse value. If the replacement fuse is not of the same
value, damage to the Subwoofer Amplifier may result.
CAUTION! Before replacing the fuse, disconnect the power cord from
the power receptacle.
11. Power: Power on and off switch.
Impression Series
SUBWOOFER USER’S GUIDE
For assistance, please call 801-991-1308 or check http://www.emptek.com for updated instructions.
Specifications
Model ES10i Subwoofer
Frequency Response: 40Hz – 180Hz
Amplifier Power: 100 Watts (110V Only!)
Woofer: (1) 10” (254mm) Poly-matrix Cone
Crossover Frequencies: 40Hz – 180Hz (Low Pass)
Dimensions: (Includes Base) 14 1 / 8
” (359mm) W
15” (381mm) H
16
1 / 4
” (413mm) D
Cabinet Color: High-gloss Red Burl or Black Wood
Weight: 27 lbs. (12.25 Kg)
Troubleshooting
Situation: Probable Cause: Solution:
No sound from
subwoofer(s) Amplifier is not con-
nected to constant
power outlet. Make certain the amplifier is
plugged into an unswitched AC
power outlet.
Amplifier is not
receiving an audio
signal from receiver or
processor Make certain there is an audio
signal from receiver or processor.
Amplifier fuse might
be blown. Replace fuse (if fuse is not readily
accessible, consult your authorized
RBH Sound dealer).
Performance is less
than expected Crossover frequency
not adjusted correctly. Adjust the crossover frequency by
turning the crossover frequency
control clockwise until the desired
sound is obtained.
Warranty
Engineered Music Products “EMP Tek” warrants all EMP speakers and subwoofers (the
“Product”) are covered by a limited warranty against defects in materials and workman-
ship for a period of 5 (five) years on the woofer and cabinet, and 1 (one) year on the
amplifier from the original date of purchase from an authorized EMP Tek dealer or the
EMP Tek website. This warranty extends only to the original consumer purchaser. EMP
Tek does not warrant goods used in industrial applications. This warranty does not cover
any expenses incurred in any removal or re-installation of the product.
If the product should prove defective within the warranty period, contact EMP Tek for a
return authorization number prior to returning the product by prepaid delivery to EMP
Tek, along with the original sales invoice or other proof of purchase, which establishes
eligibility for warranty service. EMP Tek will, at its option, replace or repair the product
free of charge and return the product by prepaid delivery. This warranty does not apply to
any product which has been damaged, misused, altered, neglected or repaired by anyone
other than an EMP Tek authorized service facility.
Any implied warranties including fitness for use and merchantability are limited in dura-
tion to the period of the express warranties set forth above, and no person is authorized to
assume for EMP Tek any other liability in connection with the sale of the product. EMP
Tek expressly disclaims liability for any incidental and consequential damages caused
by the product or the result of failure of this product. The remedies provided under this
warranty are exclusive and in lieu of all others.
This warranty gives specific legal rights. In addition, there may be other legal rights arising
from the sale of the product, which vary from state to state. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply in some areas.
Impression Series Subwoofer Diagram.