Service – Eskimo 893BQ9 User Manual
Page 6
Page 6
SERVICE INFORMA
SERVICE INFORMA
SERVICE INFORMA
SERVICE INFORMA
SERVICE INFORMATION
TION
TION
TION
TION
At Ardisam, we build quality and durability into
the design of our products; but no amount of
careful design by us, and careful maintenance by
you, can guarantee a repair-free life for your
auger. Most repairs will be minor, and easily fixed
by following the suggestions in the
troubleshooting guide in this section.
The guide will help you pinpoint the causes of
common problems and identify remedies.
For more complicated repairs, you may want to
rely on your retailer, an authorized mechanic or
Ardisam, Inc. (contact your retailer for a list of
authorized mechanics in your area). A parts
catalog is included in this section.
We will always be glad to answer any questions
you have, or help you find suitable assistance. To
order parts or inquire about warranty, call or write
us at the address found in the next column under
the section ordering repair parts or check out our
website - www.ardisam.com
SERVICE
SERVICE
SERVICE
SERVICE
SERVICE, TROUBLESHOO
, TROUBLESHOO
, TROUBLESHOO
, TROUBLESHOO
, TROUBLESHOOTING AND REP
TING AND REP
TING AND REP
TING AND REP
TING AND REPAIR
AIR
AIR
AIR
AIR
ICE POINT REPLACEMENT
ICE POINT REPLACEMENT
ICE POINT REPLACEMENT
ICE POINT REPLACEMENT
ICE POINT REPLACEMENT
1. Remove blade protector and both blades.
2. Remove nut and retaining bolt from point.
3. Using a locking pliers, grasp point and pull out.
If holder doesn’t come out with the point,
remove with pliers.
4. With locking pliers, push in new point and
holder aligning bolt hole in point with holes in
auger shaft. DO NOT DAMAGE END OF
POINT.
NOTE: When installing holder in auger
shaft, edges of holder may shave off.
5. Insert retaining bolt and tighten with nut.
6. Re-attach both blades and put blade protector
back on.
IN CASE OF A SERVICE PROBLEM, DO NOT SEND
UNIT BACK TO RETAILER. CONTACT ARDISAM, INC.
AT 1-800-345-6007.
Auger blades and point are extremely sharp. Use
caution when removing & replacing.
CAUTION