Eurocom M735T Puma - Manual (Page 22)

16 - System Map: Right View
Concise User’s Guide
English
System Map: Right View
Figure 7
RIght View
1. Optical Device Drive
Bay
2. Emergency Eject Hole
3. USB 2.0 Port
4. RJ-11 Phone Jack
5. Security Lock Slot
1
4
2
3 5

Changing DVD Regional Codes
Go to the Control Panel and double-click Device
Manager (Hardware and Sound), then click the +
next to DVD/CD-ROM drives. Double-click on the
DVD-ROM device to bring up the Properties dialog
box, and select the DVD Region (tab) to bring up the
control panel to allow you to adjust the regional code.
DVD region detection is device dependent, not OS-
dependent. You can select your module’s region code
5 times. The fifth selection is permanent. This cannot
be altered even if you change your operating system
or you use the module in another computer.

CD Emergency Eject
If you need to manually eject a CD/
DVD (e.g. due to an unexpected power
interruption) you may push the end of a
straightened paper clip into the emer-
gency eject hole. Do not use a sharp-
ened pencil or similar object that may
break and become lodged in the hole.
Media Warning
Don’t try to remove a floppy disk/CD/
DVD while the system is accessing it.
This may cause the system to “crash”.
1 5
2
4 3
Model A
Model B