Eurocom R130T ELEMENT - Manual (Page 83)

BIOS Utilities
Advanced Menu 5 - 9
5
Installed O/S (Advanced Menu)
This setting tells the computer what kind of operating system you’re using. Make
sure you choose the correct setting for your O/S in order to prevent system problems.
Note: If you select the Vista O/S then the SATA Mode Selection menu will become
available. If you are installing the Windows XP O/S make sure you have set the ap-
propriate operating system here in order to prevent system problems.
Legacy USB Support: (Advanced Menu)
Choose “Enabled” if you intend to use USB devices in systems which do not nor-
mally support USB functionality (e.g. DOS). The default setting is “Enabled” and
does not need to be changed if you intend to use your USB devices in Windows.
Boot-time Diagnostic Screen (Advanced Menu)
Use this menu item to enable/disable the Boot-time Diagnostic Screen or POST
screen (see
“The Power-On Self Test (POST)” on page 5 - 2 ).
Legacy OS Boot (Advanced Menu)
If “Enabled” the system will attempt to load the Legacy OS (e.g. Vista/Windows
XP) first. If set to “Disabled” the system will attempt to EFI (Extensible Firmware
Interface) boot before the Legacy OS.