Eurocom T3 Contessa - Manual (Page 9)

3
7 7 7 . . .
Make sure to use the right voltage for the power source when
connecting the equipment to the power outlet.
8 8 8 . . .
Place the power cord in such a way that people can not step
on it. Do not place anything on top of the power cord.
9
9 9 .
. .
All cautions and warnings on the equipment should be noted.
1 1 1 0 0 0 . . .
If the equipment is not use for a long time, disconnect the
equipment from the main power outlet to avoid being damaged
by transient overvoltage.
1
1 1 1
1 1 .
. .
Never pour any liquid into the opening, this could cause fire or
electrical shock.
1 1 1 2 2 2 . . .
Never open the equipment. For safety reason, the equipment
should only be opened by a qualified service personnel.
1 1 1 3 3 3 . . .
If on the following situations arises, get the equipment
checked by a service personnel:
a. The Power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment has not worked well or you cannot get it
work according to the user's manual.
e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage.
1 1 1 4 4 4 . . .
Do not leave this equipment in an environment unconditioned,
storage temperature above 60
°C (140°f), it may damage the
equipment.
1
1 1 5
5 5 .
. .
The unit can be operated at an ambient temperature of max.
5
°C to 35°C.
1 1 1 6 6 6 . . .
The sound pressure level at the operators position according
to IEC 704-1: 1982 is equal or less than 70 dB(A).
1
1 1 7
7 7 .
. .
Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor,
whether it is 100-240 Vac. The following information explains
the requirements for power cord set selection.
„ The cord set must be approved for the country in
which it is used.
„ The appliance coupler must have a configuration for
mating with a CEE7/EN60320/IEC 320/NEMA/ JIS C
8303 appliance inlet.
A. For U.S. and Canada:
„ The cord set must be UL Listed and CSA Certified.