Chapter 4: drivers & utilities, What to install, Module driver installation – Eurocom Racer 4W User Manual

Page 135: Drivers & utilities, What to install -1 module driver installation -1, Refer to, Drivers

Advertising
background image

Drivers & Utilities

What to Install 4 - 1

4

Chapter 4: Drivers & Utilities

This chapter deals with installing the drivers and utilities essential to the operation or
improvement of some of the computer’s subsystems. The system takes advantage of
some newer hardware components for which the latest versions of most available op-
erating systems haven’t built in drivers and utilities. Thus, some of the system com-
ponents won’t be auto-configured with an appropriate driver or utility during
operating system installation. Instead, you need to manually install some system-re-
quired drivers and utilities.

What to Install

The Device Drivers & Utilities + User’s Manual disc contains the drivers and utili-
ties necessary for the proper operation of the computer.

Table 4 - 1, on page 4 - 3

lists what you need to install and it is very important that the drivers are installed
by the method outlined in this chapter, and in the order
indicated.

Note that the information included on the following pages is for Windows 8.1 (64-
bit) only
.

Module Driver Installation

The procedures for installing drivers for the Wireless LAN, Bluetooth & WLAN
Combo, Intel Technology
and Sound Blaster Cinema modules are provided in

“Modules” on page 7 - 1

.

Driver Installation &

Power

When installing driv-
ers make sure your
computer is powered
by the AC/DC adapter
connected to a work-
ing power source
.
Some drivers draw a
significant amount of
power during the instal-
lation procedure, and if
the remaining battery
capacity is not adequate
this may cause the sys-
tem to shut down and
cause system problems
(note that there is no
safety issue involved
here, and the battery will
be rechargeable within 1
minute).

Advertising