Eurocom Scorpius 3 - Manual (Page 10)

5
Engl
ish
Model Differences
This notebook series includes three different model types that mainly differ as indicated in the table below.
Table 1 - Model Differences
RAID Setup
You may use your hard disks in combination with Striping (RAID 0), Mirroring (RAID 1) or Recovery for either fault
tolerance or performance.
Table 2 - RAID Description
Feature Model A Model B Model C
Display Type
17.3" (43.94cm) FHD
Note that Model B computers include a 2nd Design Style
for the Top Cover
17.3" (43.94cm) FHD, 120Hz
Supports 3D solution with NV 3D VISION Kit
(with 2 Shutter Glasses)
Built-in 3D IR Emitter
Microphone Built-In Microphone Built-In Array Microphone Built-In Microphone
Illuminated Touchpad No Yes No
PC Camera
2.0M FHD PC Cam-
era Module
Dual PC Camera Module
(5.0M Pixels / 1.0M HD)
2.0M FHD PC Camera
Module
RAID Level Description
RAID 0
(at lease two hard disks/
SSDs needed)
Identical drives reading and writing data in parallel to increase performance. RAID 0 implements a striped
disk array and the data is broken into blocks and each block is written to a separate disk drive.
RAID 1
(at lease two hard disks/
SSDs needed)
Identical drives in a mirrored configuration used to protect data. Should a drive that is part of a mirrored
array fail, the mirrored drive (which contains identical data) will handle all the data. When a new replace-
ment drive is installed, data to the new drive is rebuilt from the mirrored drive to restore fault tolerance.
Recovery
(at lease two hard disks/
SSDs needed)
Two Identical drives copying data between a master and a recovery disk. This provides more control over how
data is copied between the master and recovery drives, fast volume updates and the ability to view the data in
Windows Explorer.