Eurocom A9100 Uno 2.0 - Manual (Page 135)

Troubleshooting
Wake On LAN Setup 8 - 15
8
6. Click Advanced (tab).
7. Scroll down to the bottom of the Property menu and click to select each of the values listed below.
Figure 8 - 7 - Network Adapter Wake On LAN (Advanced)
8. Click to select Enabled for each Property item from the drop-down Value menu.
9. Click OK to close the menu.
10. Close the Computer Management control panel.

Property Item Settings for Wake On LAN
Set each of the following Property items to En-
abled.
Item: Setting:
• Wake on Connect Enabled
• Wake on Link Raised Enabled
• Wake on Magic Packet Enabled
• Wake on Pattern Match Enabled
• Wakeup from Shutdown Enabled